Intune Settings Catalog ViewerIntune Settings
Browse
OIB Lookup
LookupChangelog
MS Baselines
LookupChangelog
ComplianceChangelogMCPAbout

Data sourced from Microsoft Graph API. Not affiliated with Microsoft. By Lewis Barry | Enhanced by Roy Klooster.

Try rmmguard.com · Last updated: November 13, 2026

HomeMicrosoft Outlook 2016SecuritySecurity Form SettingsOutlook Security Mode (User)

Outlook Security Mode (User)

Windows

Category: Security Form Settings

WindowsMDM

Description

This policy setting controls which set of security settings are enforced in Outlook. If you enable this policy setting, you can choose from four options for enforcing Outlook security settings: * Outlook Default Security - This option is the default configuration in Outlook. Users can configure security themselves, and Outlook ignores any security-related settings configured in Group Policy. * Use Security Form from 'Outlook Security Settings' Public Folder - Outlook uses the settings from the security form published in the designated public folder. * Use Security Form from 'Outlook 10 Security Settings' Public Folder - Outlook uses the settings from the security form published in the designated public folder. * Use Outlook Security Group Policy - Outlook uses security settings from Group Policy. Important - You must enable this policy setting if you want to apply the other Outlook security policy settings mentioned in this guide. If you disable or do not configure this policy setting, Outlook users can configure security for themselves, and Outlook ignores any security-related settings that are configured in Group Policy. Note - In previous versions of Outlook, when security settings were published in a form in Exchange Server public folders, users who needed these settings required the HKEY_CURRENT_USER\Software\Policies\Microsoft\Security\CheckAdminSettings registry key to be set on their computers for the settings to apply. In Outlook, the CheckAdminSettings registry key is no longer used to determine users' security settings. Instead, the Outlook Security Mode setting can be used to determine whether Outlook security should be controlled directly by Group Policy, by the security form from the Outlook Security Settings Public Folder, or by the settings on users' own computers.

Options (2)

Disabled(default)
Enabled
./User/Vendor/MSFT/Policy/Config/outlk16v2~Policy~L_MicrosoftOfficeOutlook~L_Security~L_SecurityFormsettings/L_OutlookSecurityMode

Child Settings (43)

Configure Outlook object model prompt when sending mail (User)

This policy setting controls what happens when an untrusted program attempts to send e-mail programmatically using the Outlook object model. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to send e-mail programmatically using the Outlook object model: - Prompt user - The user will be prompted to approve every access attempt. - Automatically approve - Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny - Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security. Outlook will only prompt users when antivirus software is out of date or not running. Important: This policy setting only applies if the ''Outlook Security Mode'' policy setting under ''Microsoft Outlook 2016\Security\Security Form Settings'' is configured to ''Use Outlook Security Group Policy.'' If you disable or do not configure this policy setting, when an untrusted application attempts to send mail programmatically, Outlook relies on the setting configured in the ''Programmatic Access'' section of the Trust Center.

Select level: (User)
Authentication with Exchange Server (User)

This policy setting controls which authentication method Outlook uses to authenticate with Microsoft Exchange Server. Note - Exchange Server supports the Kerberos authentication protocol and NTLM for authentication. The Kerberos protocol is the more secure authentication method and is supported on Windows 2000 Server and later versions. NTLM authentication is supported in pre-Windows 2000 environments. If you enable this policy setting, you can choose from three different options for controlling how Outlook authenticates with Microsoft Exchange Server: - Kerberos/NTLM password authentication. Outlook attempts to authenticate using the Kerberos authentication protocol. If this attempt fails, Outlook attempts to authenticate using NTLM. This option is the default configuration. - Kerberos password authentication. Outlook attempts to authenticate using the Kerberos protocol only. - NTLM password authentication. Outlook attempts to authenticate using NTLM only. If you disable or do not configure this policy setting, Outlook will attempt to authenticate using the Kerberos authentication protocol. If it cannot (because no Windows 2000 or later domain controllers are available), it will authenticate using NTLM.

Guard behavior: (User)
Configure Outlook object model prompt When accessing the Formula property of a UserProperty object (User)

This policy setting controls what happens when a user designs a custom form in Outlook and attempts to bind an Address Information field to a combination or formula custom field. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to access address information using the UserProperties. Find method of the Outlook object model: - Prompt user. The user will be prompted to approve every access attempt. - Automatically approve. Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny. Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security. Outlook will only prompt users when antivirus software is out of date or not running. If you disable or do not configure this policy setting, when a user tries to bind an address information field to a combination or formula custom field in a custom form, Outlook relies on the setting configured in the ''Programmatic Access'' section of the Trust Center.

Configure Outlook object model prompt when reading address information (User)

This policy setting controls what happens when an untrusted program attempts to gain access to a recipient field, such as the ''To:'' field, using the Outlook object model. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to access a recipient field using the Outlook object model: - Prompt user. The user will be prompted to approve every access attempt. - Automatically approve. Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny. Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security. Outlook will only prompt users when antivirus software is out of date or not running. This is the default configuration. If you disable or do not configure this policy setting, when an untrusted application attempts to access recipient fields, Outlook relies on the setting configured in the ''Programmatic Access'' section of the Trust Center.

Configure Outlook object model prompt when responding to meeting and task requests (User)

This policy setting controls what happens when an untrusted program attempts to programmatically send e-mail in Outlook using the Response method of a task or meeting request. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to programmatically send e-mail using the Response method of a task or meeting request: - Prompt user. The user will be prompted to approve every access attempt. - Automatically approve. Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny. Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security. Outlook only prompts users when antivirus software is out of date or not running. This is the default configuration. If you disable or do not configure this policy setting, when an untrusted application attempts to respond to tasks or meeting requests programmatically, Outlook relies on the setting configured in the ''Programmatic Access'' section of the Trust Center.

Prevent users from customizing attachment security settings (User)

This policy setting prevents users from overriding the set of attachments blocked by Outlook. If you enable this policy setting users will be prevented from overriding the set of attachments blocked by Outlook. Outlook also checks the "Level1Remove" registry key when this setting is specified. If you disable or do not configure this policy setting, users will be allowed to override the set of attachments blocked by Outlook.

Removed Extensions: (User)
Retrieving CRLs (Certificate Revocation Lists) (User)

This policy setting controls how Outlook retrieves Certificate Revocation Lists to verify the validity of certificates.Certificate revocation lists (CRLs) are lists of digital certificates that have been revoked by their controlling certificate authorities (CAs), typically because the certificates were issued improperly or their associated private keys were compromised. If you enable this policy setting, you can choose from three options to govern how Outlook uses CRLs: - Use system Default. Outlook relies on the CRL download schedule that is configured for the operating system. - When online always retrieve the CRL. This option is the default configuration in Outlook. - Never retrieve the CRL. Outlook will not attempt to download the CRL for a certificate, even if it is online. This option can reduce security. If you disable or do not configure this policy setting, when Outlook handles a certificate that includes a URL from which a CRL can be downloaded, Outlook will retrieve the CRL from the provided URL if Outlook is online.

Select the authentication with Exchange server. (User)
Outlook Security Policy: (User)
Allow users to demote attachments to Level 2 (User)

This policy setting controls whether Outlook users can demote attachments to Level 2 by using a registry key, which will allow them to save files to disk and open them from that location. Outlook uses two levels of security to restrict access to files attached to e-mail messages or other items. Files with specific extensions can be categorized as Level 1 (users cannot view the file) or Level 2 (users can open the file after saving it to disk). Users can freely open files of types that are not categorized as Level 1 or Level 2. If you enable this policy setting, users can create a list of Level 1 file types to demote to Level 2 by adding the file types to the following registry key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security\Level1Remove. If you disable or do not configure this policy setting, users cannot demote level 1 attachments to level 2, and the HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security\Level1Remove registry key has no effect.

Allow scripts in one-off Outlook forms (User)

This policy setting controls whether scripts can run in Outlook forms in which the script and layout are contained within the message. If you enable this policy setting, scripts can run in one-off Outlook forms. If you disable or do not configure this policy setting, Outlook does not run scripts in forms in which the script and the layout are contained within the message. Important: This policy setting only applies if the "Outlook Security Mode" policy setting under "Microsoft Outlook 2016\Security\Security Form Settings" is configured to "Use Outlook Security Group Policy."

Enable RPC encryption (User)

This policy setting controls whether Outlook uses remote procedure call (RPC) encryption to communicate with Microsoft Exchange servers. If you enable this policy setting, Outlook uses RPC encryption when communicating with an Exchange server. Note - RPC encryption only encrypts the data from the Outlook client computer to the Exchange server. It does not encrypt the messages themselves as they traverse the Internet. If you disable or do not configure this policy setting, RPC encryption is still used by default. This setting allows you to override the corresponding per-profile setting.

Allow hyperlinks in suspected phishing e-mail messages (User)

This policy setting controls whether hyperlinks in suspected phishing e-mail messages in Outlook are allowed. If you enable this policy setting, Outlook will allow hyperlinks in suspected phishing messages that are not also classified as junk e-mail. If you disable or do not configure this policy setting, Outlook will not allow hyperlinks in suspected phishing messages, even if they are not classified as junk e-mail.

L_empty31
Remove file extensions blocked as Level 2 (User)

This policy setting controls which types of attachments (determined by file extension) must be saved to disk before users can open them. Files with specific extensions can be categorized as Level 1 (users cannot view the file) or Level 2 (users can open the file after saving it to disk). Users can freely open files of types that are not categorized as Level 1 or Level 2. If you enable this policy setting, you can specify a list of attachment file types to classify as Level 2, which forces users to actively decide to download the attachment to view it. If you disable or do not configure this policy setting, Outlook does not classify any file type extensions as Level 2. Important: This policy setting only applies if the "Outlook Security Mode" policy setting under "Microsoft Outlook 2016\Security\Security Form Settings" is configured to "Use Outlook Security Group Policy."

Allow Active X One Off Forms (User)

By default, third-party ActiveX controls are not allowed to run in one-off forms in Outlook. You can change this behavior so that Safe Controls (Microsoft Forms 2.0 controls and the Outlook Recipient and Body controls) are allowed in one-off forms, or so that all ActiveX controls are allowed to run.

Sets which ActiveX controls to allow.
Configure Outlook object model prompt when accessing an address book (User)

This policy setting controls what happens when an untrusted program attempts to gain access to an Address Book using the Outlook object model. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to programmatically access an Address Book using the Outlook object model: - Prompt user - Users are prompted to approve every access attempt. - Automatically approve - Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny - Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security - Outlook will rely on the setting in the ''Programmatic Access'' section of the Trust Center. This is the default behavior. If you disable or do not configure this policy setting, when an untrusted application attempts to access the address book programmatically, Outlook relies on the setting configured in the ''Programmatic Access'' section of the Trust Center.

Removed Extensions: (User)
When executing a custom action: (User)
Signature Warning (User)
Include Internet in Safe Zones for Automatic Picture Download (User)

This policy setting controls whether pictures and external content in HTML e-mail messages from untrusted senders on the Internet are downloaded without Outlook users explicitly choosing to do so. If you enable this policy setting, Outlook will automatically download external content in all e-mail messages sent over the Internet and users will not be able to change the setting. If you disable or do not configure this policy setting, Outlook does not consider the Internet a safe zone, which means that Outlook will not automatically download content from external servers unless the sender is included in the Safe Senders list. Recipients can choose to download external content from untrusted senders on a message-by-message basis.

Guard behavior: (User)
Signature Warning (User)

This policy setting controls how Outlook warns users about messages with invalid digital signatures. If you enable this policy setting, you can choose from three options for controlling how Outlook users are warned about invalid signatures: - Let user decide if they want to be warned. This option enforces the default configuration. - Always warn about invalid signatures. - Never warn about invalid signatures. If you disable or do not configure this policy setting, if users open e-mail messages that include invalid digital signatures, Outlook displays a warning dialog. Users can decide whether they want to be warned about invalid signatures in the future.

Guard behavior: (User)
Do not allow Outlook object model scripts to run for public folders (User)

This policy setting controls whether Outlook executes scripts that are associated with custom forms or folder home pages for public folders. If you enable this policy setting, Outlook cannot execute any scripts associated with public folders, overriding any configuration changes on users' computers. If you disable this policy setting, Outlook will automatically run any scripts associated with custom forms or folder home pages for public folders, overriding any configuration changes on users' computers. If you do not configure this policy setting, Outlook will not run any scripts associated with public folders by default. Users can configure the setting in the Trust Center by selecting the “Allow script in public folders” check box.

Security setting for macros (User)

This policy setting controls the security level for macros in Outlook. If you enable this policy setting, you can choose from four options for handling macros in Outlook: - Always warn. This option corresponds to the "Warnings for all macros" option in the "Macro Security" section of the Outlook Trust Center. Outlook disables all macros that are not opened from a trusted location, even if the macros are signed by a trusted publisher. For each disabled macro, Outlook displays a security alert dialog box with information about the macro and its digital signature (if present), and allows users to enable the macro or leave it disabled. - Never warn, disable all. This option corresponds to the "No warnings and disable all macros" option in the Trust Center. Outlook disables all macros that are not opened from trusted locations, and does not notify users. - Warning for signed, disable unsigned. This option corresponds to the "Warnings for signed macros; all unsigned macros are disabled" option in the Trust Center. Outlook handles macros as follows: --If a macro is digitally signed by a trusted publisher, the macro can run if the user has already trusted the publisher. --If a macro has a valid signature from a publisher that the user has not trusted, the security alert dialog box for the macro lets the user choose whether to enable the macro for the current session, disable the macro for the current session, or to add the publisher to the Trusted Publishers list so that it will run without prompting the user in the future. --If a macro does not have a valid signature, Outlook disables it without prompting the user, unless it is opened from a trusted location. This option is the default configuration in Outlook. - No security check. This option corresponds to the "No security check for macros (Not recommended)" option in the Trust Center. Outlook runs all macros without prompting users. This configuration makes users' computers vulnerable to potentially malicious code and is not recommended. If you disable or do not configure this policy setting, the behavior is the equivalent of Enabled -- Warning for signed, disable unsigned.

Guard behavior: (User)
Remove file extensions blocked as Level 1 (User)

This policy setting controls which types of attachments (determined by file extension) Outlook prevents from being delivered. Outlook uses two levels of security to restrict users' access to files attached to e-mail messages or other items. Files with specific extensions can be categorized as Level 1 (users cannot view the file) or Level 2 (users can open the file after saving it to disk). Users can freely open files of types that are not categorized as Level 1 or Level 2. If you enable this policy setting, you can specify the removal of file type extensions as that Outlook classifies as Level 1--that is, to be blocked from delivery--by entering them in the text field provided separated by semicolons. If you disable or do not configure this policy setting, Outlook classifies a number of potentially harmful file types (such as those with .exe, .reg, and .vbs extensions) as Level 1 and blocks files with those extensions from being delivered. Important: This policy setting only applies if the "Outlook Security Mode" policy setting under "Microsoft Outlook 2016\Security\Security Form Settings" is configured to "Use Outlook Security Group Policy."

Use Unicode format when dragging e-mail message to file system (User)

This policy setting controls whether e-mail messages dragged from Outlook to the file system are saved in Unicode or ANSI format. If you enable or do not configure this policy setting, when users drag an e-mail message from Outlook to the file system, Outlook uses the Unicode character encoding standard to create the message file, which preserves special characters in the message. If you disable this policy setting, when users drag an e-mail message from Outlook to the file system, the message file created is in ANSI format.

Security Level (User)
Set Outlook object model custom actions execution prompt (User)

This policy setting controls whether Outlook prompts users before executing a custom action. Custom actions add functionality to Outlook that can be triggered as part of a rule. Among other possible features, custom actions can be created that reply to messages in ways that circumvent the Outlook model's programmatic send protections. If you enable this policy setting, you can choose from four options to control how Outlook functions when a custom action is executed that uses the Outlook object model: * Prompt User * Automatically Approve * Automatically Deny * Prompt user based on computer security. This option enforces the default configuration in Outlook. If you disable or do not configure this policy setting, when Outlook or another program initiates a custom action using the Outlook object model, users are prompted to allow or reject the action. If this configuration is changed, malicious code can use the Outlook object model to compromise sensitive information or otherwise cause data and computing resources to be at risk. This is the equivalent of choosing Enabled -- Prompt user based on computer security.

Guard behavior: (User)
Guard behavior: (User)
Minimum key size (in bits): (User)
Junk E-mail protection level (User)

This policy setting controls your Junk E-mail protection level. The Junk E-mail Filter in Outlook helps to prevent junk e-mail messages, also known as spam, from cluttering user's Inbox. The filter evaluates each incoming message based on several factors, including the time when the message was sent and the content of the message. The filter does not single out any particular sender or message type, but instead analyzes each message based on its content and structure to discover whether or not it is probably spam. If you enable this policy setting, you can select one of the four listed options available. After you select an option, users will not be able to change it. If you disable this policy setting, Outlook reverts to the user-defined protection level. If you do not configure this policy setting, users can change their junk e-mail filtering options.

Minimum encryption settings (User)

This policy setting allows you to set the minimum key length for an encrypted e-mail message. If you enable this policy setting, you may set the minimum key length for an encrypted e-mail message. Outlook will display a warning dialog if the user tries to send a message using an encryption key that is below the minimum encryption key value set. The user can still choose to ignore the warning and send using the encryption key originally chosen. If you disable or do not configure this policy setting, a dialog warning will be shown to the user if the user attempts to send a message using encryption. The user can still choose to ignore the warning and send using the encryption key originally chosen.

Do not allow Outlook object model scripts to run for shared folders (User)

This policy setting controls whether Outlook executes scripts associated with custom forms or folder home pages for shared folders. If you enable this policy setting, Outlook cannot execute any scripts associated with shared folders, overriding any configuration changes on users' computers. If you disable this policy setting, Outlook will automatically run any scripts associated with custom forms or folder home pages for shared folders. If you do not configure this policy setting, the behavior is the equivalent of setting the policy to Enabled.

Display Level 1 attachments (User)

This policy setting controls whether Outlook blocks potentially dangerous attachments designated Level 1. Outlook uses two levels of security to restrict users' access to files attached to e-mail messages or other items. Files with specific extensions can be categorized as Level 1 (users cannot view the file) or Level 2 (users can open the file after saving it to disk). Users can freely open files of types that are not categorized as Level 1 or Level 2. If you enable this policy setting, Outlook users can gain access to Level 1 file type attachments by first saving the attachments to disk and then opening them, as with Level 2 attachments. If you disable this policy setting, Level 1 attachments do not display under any circumstances. If you do not configure this policy setting, Outlook completely blocks access to Level 1 files, and requires users to save Level 2 files to disk before opening them.

Configure Outlook object model prompt when executing Save As (User)

This policy setting controls what happens when an untrusted program attempts to use the Save As command to programmatically save an item. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to use the Save As command to programmatically save an item: - Prompt user. The user will be prompted to approve every access attempt. - Automatically approve. Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny. Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security. Outlook will only prompt users when antivirus software is out of date or not running. This is the default configuration. If you disable or do not configure this policy setting, when an untrusted application attempts to use the Save As command, Outlook relies on the setting configured in the ''Programmatic Access'' section of the Trust Center.